Description
Carbide Nail Drill Bit is a Corn-shaped carbide bit with a blue medium cross-cut. It is designed for removing gel polish and artificial nail materials, correcting extensions and reducing the thickness of gel or other artificial coatings. The rounded Corn profile allows controlled work across larger nail surfaces and around the sidewall area.
Key Features
-
Corn / rounded cone shape for efficient material removal
- 5 mm working diameter
- 14 mm working surface length
-
Blue marking — medium cut
-
Cross-shaped teeth for controlled and efficient cutting
- Made from carbide
- Suitable for e-file manicure and pedicure
- Designed for gel polish and artificial nail materials
- Suitable for nail correction and material reduction
- 2.35 mm shank compatibility is listed for the 31235 model.
Applications
31235 is suitable for:
- Removing gel polish from artificial nails
- Removing gel and other artificial coatings
- Reducing the thickness of artificial material
- Correcting the length and shape of extended nails
- Removing excess material during nail correction
- Working with thickened nails
- Selected pedicure procedures, including callus and hardened-skin treatment.
Blue Medium Cross-Cut
The blue marking indicates a medium cut. The cross-shaped teeth provide several cutting edges for efficient yet controlled material removal. Compared with a coarse green bit, the blue cut is suitable when a more moderate cutting action is required.
The Corn profile provides a relatively broad working surface while the rounded shape helps maintain controlled contact during correction work.
How to Use
Insert the bit into a compatible e-file handpiece and select the rotation speed according to the material and procedure. Work with smooth, controlled movements and moderate pressure. Avoid prolonged contact with one area.
The bit is intended primarily for artificial materials and correction procedures. Avoid aggressive filing directly on the natural nail plate.
Disinfection & Sterilization
Disinfection:
- After use, place the carbide bit into a suitable disinfectant solution. The concentration and exposure time should follow the instructions of the selected disinfectant.
- Clean the working surface from product residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, the use of an ultrasonic cleaner is recommended.
- Rinse the bit under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization:
Autoclave: Place the cleaned and dried bit into a sterilization pouch and seal it before placing it in the autoclave.
Sterilization cycle: 132°C, 2 bar, 20 minutes.
Dry heat sterilization: Place the cleaned and dried bit into a dry-heat sterilizer.
Sterilization cycle: 180°C, 60 minutes.
