Description
Carbide nail drill bit 274140060 in a rounded Corn shape features a fine red cross-cut designed for controlled removal and refinement of artificial nail materials. The 6 mm working diameter provides a broad contact surface for efficient processing of gel, acrylic and other artificial coatings.
The fine red cut is suitable for more controlled material removal, nail correction and finishing work. The rounded Corn shape allows convenient processing of larger areas while helping maintain smooth, even movements during correction of nail length and shape.
Key Features
-
Product type: Carbide nail drill bit
-
Model: 274140060
-
Shape: Corn / rounded cone
-
Cut type: Cross-shaped teeth
-
Cut color: Red
-
Abrasiveness: Fine
-
Working diameter: 6 mm
-
Working length: 14 mm
-
Shank diameter: 2.35 mm
-
Material: Carbide
The 274140060 model is listed with a 6 mm diameter, 14 mm working length and fine red cross-cut.
Applications
The 274140060 Corn carbide bit is suitable for:
- Removing gel polish from artificial nails
- Removing gel and acrylic materials
- Reducing the thickness of artificial coatings
- Correcting nail length and shape
- Refining artificial nail extensions
- Removing excess material during correction
- Smoothing and finishing artificial nail surfaces
- Working with areas where controlled material removal is required
The fine cross-cut makes this bit particularly suitable when a more controlled cut is preferred over a coarse carbide bit. Similar 6 mm fine cross-cut carbide models are also listed for gel-layer removal and finishing.
How to Use
Select the rotation speed according to the material and procedure. Work with light, controlled movements and avoid excessive pressure or prolonged contact in one area.
When working close to the natural nail plate, use appropriate technique and avoid unnecessary contact with the natural nail.
Disinfection
- After use, place the carbide bit into a suitable disinfectant solution. Follow the concentration and exposure time specified by the disinfectant manufacturer.
- Clean the working surface from material residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, an ultrasonic cleaner is recommended.
- Rinse under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization
Autoclave:
Place the cleaned and completely dried bit into a sterilization pouch, seal it and process in an autoclave.
Recommended cycle: 132°C, 2 bar, 20 minutes.
Dry heat:
Place the cleaned and dried bit into a dry-heat sterilizer.
Recommended cycle: 180°C, 60 minutes.
